BMR Fabrication Ford Mustang Chasis Stiffening and suspension products carbon fiber driveshaft 2005 2006 2007

Front End

Sort By

BMR Fabrication Tubular Front A-Arms (Non-Adjustable) Mustang 2005 - 2007

BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms, 11.2 lbs. lighter than stock. Unlike our competitors, these A-arms are also compatible with your OE K-member.

Price

$399.95

More info ››

BMR Fabrication Tubular Front A-Arms (Adjustable) Mustang 2005 - 2007

BMR tubular A-arms are a lightweight alternative to your factory stamped steel arms, 9.6 lbs. lighter than stock. The adjustable version is recommended for drag race or road race applications due to the elevated noise transmission from spherical rod ends and Delrin bushings.

Price

$499.95

More info ››

BMR Fabrication Front A-Arm Support Brace Mustang 2005 - 2007

This brace bolts to the rear mount of the front A-arms, tying the two legs of the K-member together. By adding additional support to this assembly, A-arm stability is increased due to minimized mount deflection.

Price

$59.95

More info ››

BMR Fabrication Tubular Front K-Member with motor mounts - OE power rack - Mustang 05 - 07

Ford did a great job designing the '05 Mustang. Everything comes apart so easily, it almost seems like it was designed by racers. To some, a tubular K-member may seem like a complicated and difficult installation, however in the '05 Mustang it can be done in 2 hours with hand tools!

Price

$499.95

More info ››

Anti-Roll Bar

Sort By

BMR Fabrication Front 1-3/8" Swaybar Mustang 2005 - 2007

BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. All necessary bushings and hardware included.

Price

$199.95

More info ››

BMR Fabrication Rear7/8" Swaybar Mustang 2005 - 2007

BMR sway-bars decrease body roll in your 2005+ Mustang resulting in a more predictable, neutrally balanced suspension. All necessary bushings and hardware included.

Price

$199.95

More info ››

BMR Fabrication Xtreme Anti-Roll Bar - Mustang 05 - 07

Rear anti-roll bars have been proven to eliminate torque steer and body roll during hard launches and will drastically improve the cars consistency as well as stability going down the track.

Price

$449.95

More info ››

Panhard Bar

Sort By

BMR Fabrication Chrome Moly Adjustable Panhard Rod w/rod ends - Mustang 05 - 07

Factory panhard rods are made with small diameter tubing and rubber bushings that allow deflection under load. BMR panhard rods are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1.

Price

$185.95

More info ››

BMR Fabrication Tubular Adjustable Panhard Rod - Mustang 05 - 07

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber bushings that allow deflection under load. BMR panhard rods are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1. The adjustable versions use left-hand and right-hand thread to allow easy "on-car" adjustment.

Price

$134.95

More info ››

BMR Fabrication Tubular Panhard Rod - Mustang 05 - 07

The panhard rod is responsible for locating the rear end side-to-side in the chassis. Factory panhard rods are made with small diameter tubing and rubber bushings that allow deflection under load. BMR panhard rods are all made from larger diameter 1.25", heavy wall DOM tubing and utilize either greaseable polyurethane bushings or HD spherical bearings by QA1.

Price

$99.95

More info ››

BMR Fabrication Upper Panhard Rod Support - Mustang 05 - 07

Since the panhard rod is responsible for keeping the rear end centered in the chassis, their is a significant load placed on the panhard rod mounts during cornering. Our boxed tube support reinforces this critical mount to prevent deflection and can be easily installed in less than 1 hour.

Price

$109.95

More info ››

Upper Rear Control Arm

Sort By

BMR Fabrication Adjustable Upper Control Arm w/poly bushing - Mustang 05 - 07

The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle.

Price

$176.95

More info ››

BMR Fabrication Tubular Upper Control Arm w/poly bushing - Mustang 05 - 07

The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle.

Price

$135.95

More info ››

BMR Fabrication Tubular Upper Control Arm w/spherical bearing - Mustang 05 - 07

The single upper control arm is responsible for maintaining pinion angle and preventing axle counter-rotation. This "3 link" style suspension is ideal for autocross and road race applications as it allows the most articulation possible with a solid axle.

Price

$179.95

More info ››

BMR Fabrication Upper Control Arm Mount - Mustang 05 - 07

Our upper control arm mount is a direct replacement for the OE piece and requires no drilling or welding to install.

Price

$135.95

More info ››

Lower Rear Control Arms

Sort By

BMR Fabrication Billet Rear Lower Control Arms with poly bushings - Mustang 05 - 07

BMR heavy duty billet Control Arms are CNC machined from solid 1.25" x 2.5" billet 6061 T6 aluminum alloy. BMR utilizes greaseable 90 durometer spiral fluted polyurethane bushings to insure "squeak-free' suspension movement.

Price

$229.95

More info ››

BMR Fabrication Race Rear Lower Control Arms w/ rod ends- Mustang 05-07

Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving.

Price

$259.95

More info ››

BMR Fabrication Rear Control Arm Relocation Brackets 2005 - 2007 Mustang

These brackets in conjunction with our tubular control arms have already produced 1.33 60 foot times!

Price

$134.95

More info ››

BMR Fabrication Street Rear Lower Control Arms wpoly bushing/ rod ends- Mustang 05-07

Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. All of our control arms are TIG welded and utilize either greaseable 90 durometer spiral fluted polyurethane bushings or Teflon lined HD spherical bearings by QA1.

Price

$259.95

More info ››

BMR Fabrication Tubular Lower Control Arms, non-adjustable, with polyurethane bushing and spherical bearing combination - Mustang 05-07

Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. All of our control arms are TIG welded and utilize either greaseable 90 durometer spiral fluted polyurethane bushings or Teflon lined HD spherical bearings by QA1.

Price

$208.95

More info ››

BMR Fabrication Tubular Rear Lower Control Arms with poly bushings- Mustang 05-07

Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. All of our control arms are TIG welded and utilize either greaseable 90 durometer spiral fluted polyurethane bushings or Teflon lined HD spherical bearings by QA1.

Price

$134.95

More info ››

Strut Tower Brace

Sort By

BMR Fabrication Strut Tower Brace Mustang V6 2005 - 2007

BMR strut tower braces are one of the most cost effective ways to improve handling on the the new Mustang platform. We build our braces out of heavy duty DOM tubing and use 3/16" laser cut mounting plates to keep tower deflection to a minimum. Simple 15 minute installation.

Price

$139.95

More info ››

BMR Fabrication Strut Tower Brace Mustang V8 2005 - 2007

BMR strut tower braces are one of the most cost effective ways to improve handling on the the new Mustang platform. We build our braces out of heavy duty DOM tubing and use 3/16" laser cut mounting plates to keep tower deflection to a minimum. Simple 15 minute installation.

Price

$199.95

More info ››

Drive Train

Sort By

BMR Fabrication Driveshaft Safety Loop (Front) - 2005 - 2008 Mustang

NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required.

Price

$99.95

More info ››

BMR Fabrication Rear Tunnel Brace w/o loop 2005 - 2007 Mustang

BMR Fabrication Driveshaft Rear Tunnel Brace w/o loop 2005 - 2007 Mustang Available in Black Hammertone. Fits V6 and V8 models.

Price

$99.95

More info ››

BMR Fabrication Rear Tunnel Brace with loop Mustang V6 V8 2005 - 2007

NHRA required for cars running 12.99 or quicker in the quarter mile. We manufacture our loops out of NHRA legal 1/4" x 2" plate and both designs are true bolt-ons using existing mounting holes, no welding or drilling required.

Price

$139.95

More info ››

Shopping Basket

Products

Front End

Sub Frame Connectors

Anti-Roll Bar

Panhard Bar

Upper Rear Control Arm

Lower Rear Control Arms

Strut Tower Brace

Drive Train

Email A Friend

First Name

Middle Name

Last Name

Email Address*

Search by Keyword