Maximum Motorsports Rear Upper Control Arm Bushing Tool For 8.8" Mustang Rear Axle
Click to enlarge image(s)
The Rear Upper Control Arm Bushing Tool makes it much easier to change the rear control arm bushings at the differential. The bushings are a press fit in the differential housing, and are difficult to access. They are especially difficult to change if you are trying to do so without removing the rear axle assembly from your car. MM's unique tool makes this tough job much easier and faster. Zinc plated finish.
Product Photo Note:
Due to differences between production years and models, the actual product may differ slightly from photo.
Maximum Motorsports Camber Gauge
Click to enlarge image(s)
This is the gauge we use when aligning our race cars. With accuracy better than 1/8-degree, it easily matches the performance of much more expensive gauges. The range of camber adjustment is from seven-degrees positive to seven-degrees negative.
Fits all applications
Maximum Motorsports Bumpsteer Gauge
Click to enlarge image(s)
Use MM's Bumpsteer Gauge when you need to extract the most performance from your car, don't settle for a generic bumpsteer fix. A highly tuned car, or any vehicle with modified suspension geometry, must be individually checked for bumpsteer. In order to measure bumpsteer on your car you need this professional gauge from Maximum Motorsports. Whether you are a do-it-yourself hobbyist or a specialized chassis shop, this tool will be a useful addition to your collection. Includes complete copyrighted instructions for measuring bumpsteer.
Note: Correcting bumpsteer on a Mustang requires an adjustable tie-rod end kit.
Steeda Spark Plug Gap Tool - Mustang 05 - 07
Click to enlarge image(s)
This tool is designed specifically for the Ford 3 Valve cylinder heads spark plugs. Made from billet 6061 aluminum this tool features a built in set screw to allow for fine adjustments to your spark plug gap. Great for enthusiasts with supercharged or nitrous applications.
Product Benefits
* Made in house from Billet 6061 aluminum
* Lightweight and easy to use!
* A Must for power adder applications!
Fits Model Year:
2005, 2006, 2007
Maximum Motorsports IRS Subframe Bushing Removal Tool, 1999-04 Cobra
Click to enlarge image(s)
MM developed this tool to help with the removal of the stock rubber bushings from the IRS subframe. Not only does this tool make the job much easier, it also reduces the time spent removing the stock bushings by at least an hour.
Kit includes Billet Aluminum Fuel Port Block. Has two 1/8" pipe plug ports. Comes with a 60psi fuel gauge and plug. Mounts in stock location. Great for Nitrous users or customer looking to mount a fuel pressure gauge. Makes a great test port also.
Maximum Motorsports Coil-Over Spanner Wrench
Click to enlarge image(s)
The Coil-Over Spanner Wrench is used for adjusting your MM coil-over lower spring perch when pre-loading the spring is necessary. Can be used on both the front and rear MM coil-over kits.
